KEYWORDS: Semiconducting wafers, Optical alignment, Distortion, Overlay metrology, Front end of line, Lithography, Scanners, Capacitance, Current controlled current source, Yield improvement
Overlay control is more challenging when DRAM volume production continues to shrink its critical dimention (CD) to 70nm and beyond. Effected by process, the overlay behavior at wafer edge is quite different from wafer center. The big contribution to worse overlay at wafer edge which causes yield loss is misalignment. The analysis in wafer edge suggests that high order uncorrectable overlay residuals are often observed by certain process impact. Therefore, the basic linear model used for alignment correction is not sufficient and it is necessary to introduce an advanced alignment correction model for wafer edge overlay improvement. In this study, we demonstrated the achievement of moderating the poor overlay at wafer edge area by using a high order wafer alignment strategy. The mechanism is to use non-linear correction methods of high order models ( up to 5th order), with support by the function High Order Wafer Alignment (known as HOWA) in scanner. Instead of linear model for the 6 overlay parameters which come from average result, HOWA alignment strategy can do high order fitting through the wafer to get more accurate overlay parameters which represent the local wafer grid distortion better. As a result, the overlay improvement for wafer edge is achieved. Since alignment is a wafer dependent correction, with HOWA the wafer to wafer overlay variation can be improved dynamically as well. In addition, the effects of different mark quantity and sampling distribution from HOWA are also introduced in this paper.
The results of this study indicate that HOWA can reduce uncorrectable overlay residual by 30~40% and improve wafer-to-wafer overlay variation significantly. We conclude that HOWA is a noteworthy strategy for overlay improvement. Moreover, optimized alignment mark numbers and distribution layout are also key factors to make HOWA successful.
The etch loading effect from wafer center to wafer edge results in worse Bit-line Contact layer (CB) to Gate Conductor layer (GC) overlay alignment performance at the wafer edge which directly impacts device yield. One workaround for this is to introduce additional image shifts during exposure at the edge of the wafer however this will reduce throughput due to the extra time required for wafer measurement (additional leveling scans) and extra exposure time (additional image). We demonstrate a new method which can avoid this overhead using Correction Per Exposure (CPE).
We are proposing to use CPE with manually generated overlay corrections. In this way, we are achieving the necessary wafer-edge overlay compensation, and there is no throughput-loss because there is no extra-routing.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.