Paper
22 September 1997 Benefits of a new converging beam scanning method for 8- to 12-μm range imaging systems
Mark S. Shechterman
Author Affiliations +
Proceedings Volume 3110, 10th Meeting on Optical Engineering in Israel; (1997) https://doi.org/10.1117/12.281323
Event: 10th Meeting on Optical Engineering in Israel, 1997, Jerusalem, Israel
Abstract
Most 8 - 12 micron infrared imaging optical systems consist of a telescope, angular scanner for parallel beams (polygon or nodding mirror type) and a detector lens. The telescope for all magnification modes, and the detector lens system, each one separately, have to be designed close to their diffraction limit over all scanned FOV to withstand the severe resolution requirements of the entire IR system. This fact mandates several aspherical surfaces for the telescope and the detector lens systems, for purposes of residual aberration correction. This paper describes an 8 - 12 micron FLIR in which, owing to the proposed lateral scanner for converging beams, the optical system is reduced to an objective only attached to the proposed lateral scanner which fulfills lateral scanning of the scenery image in the detector plane.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Mark S. Shechterman "Benefits of a new converging beam scanning method for 8- to 12-μm range imaging systems", Proc. SPIE 3110, 10th Meeting on Optical Engineering in Israel, (22 September 1997); https://doi.org/10.1117/12.281323
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Scanners

Imaging systems

Objectives

Prisms

Telescopes

Image sensors

Back to Top