Paper
16 April 1998 Micromechanical components with novel properties
U. D. Vaishnav, Prakash R. Apte, S. G. Lokhre, V. R. Palkar, S. M. Pattalwar
Author Affiliations +
Proceedings Volume 3321, 1996 Symposium on Smart Materials, Structures, and MEMS; (1998) https://doi.org/10.1117/12.305561
Event: Smart Materials, Structures and MEMS, 1996, Bangalore, India
Abstract
This paper describes the fabrication techniques and characterization of silicon dioxide micromechanical components with a layer of porous aluminum oxide which results in novel properties. An aqueous SOL process has been developed to obtain a layer of porous aluminum oxide on the silicon dioxide. The micro-porous surface, so realized, can be used as sensitive moisture and gas detectors. Various parts fabricated in silicon dioxide are cantilever, cross beam, spiral spring and resonator, coated with porous aluminum oxide, and micro-probes, coated with chromium-gold for electrical contacts. This paper also demonstrates the use of the trapezoidal pit etched in silicon during micromachining as a radiation concentrator. The results of derivation of the concentrator efficiency clearly shows the advantage of the reflections from the trapezoidal cavity.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
U. D. Vaishnav, Prakash R. Apte, S. G. Lokhre, V. R. Palkar, and S. M. Pattalwar "Micromechanical components with novel properties", Proc. SPIE 3321, 1996 Symposium on Smart Materials, Structures, and MEMS, (16 April 1998); https://doi.org/10.1117/12.305561
Lens.org Logo
CITATIONS
Cited by 6 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Silicon

Silica

Etching

Sensors

Solar concentrators

Metals

Micromachining

Back to Top