Paper
8 January 2007 Prototype ROIC with differential pixel readout for uncooled IR detector arrays
Sang Joon Hwang, Seung Woo Ryu, Ho Hyun Shin, Man Young Sung
Author Affiliations +
Proceedings Volume 6414, Smart Structures, Devices, and Systems III; 64141D (2007) https://doi.org/10.1117/12.695636
Event: SPIE Smart Materials, Nano- and Micro-Smart Systems, 2006, Adelaide, Australia
Abstract
As infrared light is radiated, the CMOS Readout IC (ROIC) for the microbolometer type infrared sensor detects voltage or current when the resistance value in the bolometer sensor varies. One of the serious problems in designing the ROIC is that resistances in the bolometer and replica resistor have process variation. This means that each pixel does not have the same resistance, causing serious fixed pattern noise problems in sensor operations. In this paper, differential input stage readout architecture is suggested for bias offset reduction, noise immunity and high sensing margin. In addition, using this scheme the effects of a process variation problem and various other bias heating noise problems, are reduced. In this paper, a prototype ROICs, intended for uncooled microbolometer infrared focal plane array, is designed and fabricated. The proposed architecture is demonstrated by fabrication of a prototype consisting of 32 x 32 pixels fabricated in a 0.25-μm CMOS process.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Sang Joon Hwang, Seung Woo Ryu, Ho Hyun Shin, and Man Young Sung "Prototype ROIC with differential pixel readout for uncooled IR detector arrays", Proc. SPIE 6414, Smart Structures, Devices, and Systems III, 64141D (8 January 2007); https://doi.org/10.1117/12.695636
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Resistors

Bolometers

Sensors

Readout integrated circuits

Resistance

Infrared radiation

Prototyping

Back to Top