Paper
31 May 2012 Initial testing of a Si:As blocked-impurity-band (BIB) trap detector
Solomon I. Woods, Simon G. Kaplan, Timothy M. Jung, Adriaan C. Carter, James E. Proctor
Author Affiliations +
Abstract
We discuss the design, construction, and initial test results of a Si:As blocked-impurity-band (BIB) trap detector. The trap consists of two rectangular BIB devices configured in a v-shaped geometry. This trapping geometry is designed to ideally yield a minimum of 7 bounces before exit for incident light within an f/4 cone with 3 mm clear aperture. The individual BIB devices consist of 70 μm thick active layers with As doping near 1.7×1018 cm-3, and have dark currents of approximately 100 nA at an operating temperature of 9 K. A simple ray-tracing model of the trap, along with data on the quantum yield of typical BIB detector elements, indicates that it is possible to achieve an external quantum efficiency of > 0.99 over the 4 μm to 28 μm spectral range and significant suppression of the etalon fringes present in the spectral responsivity of a single element. We have made initial responsivity measurements of the trap compared to a calibrated 5 mm diameter pyroelectric detector over the 3 μm to 17 μm spectral range using the fiber-coupled output of a Fourier-transform spectrometer. We also discuss the results of comparison measurements between the trap detector and an absolute cryogenic radiometer viewing the output of a calibrated blackbody source at discrete filter bands from 5 μm to 11 μ. In initial testing the performance of the trap is limited by the poor performance of the individual BIB detectors, but the advantages of boosted quantum efficiency and suppressed etalon are realized by the trap.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Solomon I. Woods, Simon G. Kaplan, Timothy M. Jung, Adriaan C. Carter, and James E. Proctor "Initial testing of a Si:As blocked-impurity-band (BIB) trap detector", Proc. SPIE 8353, Infrared Technology and Applications XXXVIII, 83533G (31 May 2012); https://doi.org/10.1117/12.919563
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Quantum efficiency

Infrared sensors

Fourier transforms

Fabry–Perot interferometers

Calibration

Absorption

Back to Top