Compositional control of the mixed anion alloys in gallium-free InAs/InAsSb superlattice materials for infrared sensing

H. J. Haugan; F. Szmulowicz; K. Mahalingam; G. J. Brown; S. L. Bowers; J. A. Peoples

doi:10.1117/12.2186188

28 August 2015 Compositional control of the mixed anion alloys in gallium-free InAs/InAsSb superlattice materials for infrared sensing

H. J. Haugan, F. Szmulowicz, K. Mahalingam, G. J. Brown, S. L. Bowers, J. A. Peoples

Author Affiliations +

Proceedings Volume 9609, Infrared Sensors, Devices, and Applications V; 960906 (2015) https://doi.org/10.1117/12.2186188
Event: SPIE Optical Engineering + Applications, 2015, San Diego, California, United States

Abstract

Gallium (Ga)-free InAs/InAsSb superlattices (SLs) are being actively explored for infrared detector applications due to the long minority carrier lifetimes observed in this material system. However, compositional and dimensional changes through antimony (Sb) segregation during InAsSb growth can significantly alter the detector properties from the original design. At the same time, precise compositional control of this mixed-anion alloy system is the most challenging aspect of Ga-free SL growth. In this study, the authors establish epitaxial conditions that can minimize Sb surface segregation during growth in order to achieve high-quality InAs/InAsSb SL materials. A nominal SL structure of 77 Å InAs/35 Å InA_s0.7Sb_0.3 that is tailored for an approximately six-micron response at 150 K was used to optimize the epitaxial parameters. Since the growth of mixed-anion alloys is complicated by the potential reaction of As2 with Sb surfaces, the authors varied the deposition temperature (Tg) under a variety of Asx flux conditions in order to control the As2 surface reaction on a Sb surface. Experimental results reveal that, with the increase of Tg from 395 to 440 °C, Sb-mole fraction x in InA_s1-xSb_x layers is reduced by 21 %, under high As flux condition and only by 14 %, under low As flux condition. Hence, the Sb incorporation efficiency is extremely sensitive to minor variations in epitaxial conditions. Since a change in the designed compositions and effective layer widths related to Sb segregation disrupts the strain balance and can significantly impact the long-wavelength threshold and carrier lifetime, further epitaxial studies are needed in order to advance the state-of-the-art of this material system.

Citation Download Citation

H. J. Haugan, F. Szmulowicz, K. Mahalingam, G. J. Brown, S. L. Bowers, and J. A. Peoples "Compositional control of the mixed anion alloys in gallium-free InAs/InAsSb superlattice materials for infrared sensing", Proc. SPIE 9609, Infrared Sensors, Devices, and Applications V, 960906 (28 August 2015); https://doi.org/10.1117/12.2186188

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available