Developing single photon avalanche diodes (SPADs) at short-wave infrared (SWIR) wavelengths beyond 1000 nm has attracted interest lately. Numerous quantum technology applications such as light detection and ranging (LIDAR), imaging through obscurants and quantum communications require sensitivity in this region. In quantum communications, operation at the telecoms wavelengths of 1310 nm and 1550 nm is essential. Ge-on-Si SPADs offer potential for lower afterpulsing and higher single photon detection efficiencies in the SWIR in comparison with InGaAs/InP SPADs, at a lower cost due to Si foundry compatibility. In this study, Ge-on-Si devices are fabricated on silicon-on-insulator (SOI) substrates, with a separate absorption, charge and multiplication layer (SACM) geometry and a lateral Si multiplication region. This Si foundry compatible process will allow for future integration with Si waveguides and optical fibres. The Ge is selectively grown inside sub-μm wide SiO2 trenches, reducing the threading dislocation in comparison with bulk Ge; a typical process for integrated Ge detectors. Here we deliberately exposed Ge sidewalls with an etch-back technique, to allow a passivation comparison not normally carried out in selectively grown devices planarised by chemical-mechanical polishing. Reduced dark currents are demonstrated using thermal GeO2 passivation in comparison to plasma-enhanced chemical-vapourdeposition SiO2. The improved passivation performance of GeO2 is verified by activation energy extraction and density of interface trap (Dit) calculations obtained from temperature-dependent capacitance-voltage (CV) and conductance-voltage (GV) measurements. This highlights the benefit of optimal surface passivation on sub-μm wide selectively grown Ge-on-SOI photodetector devices, potentially critical for waveguide integrated SPADs.
Semiconductor based single-photon avalanche diode (SPAD) detectors are widely used in quantum technology applications, which focus on the arrival time of single photons. Using germanium as the absorption region in a Separate Absorption and Multiplication design solves the operating limitation beyond the spectrum range of silicon, i.e. typically at a wavelength of ~ 1000 nm. Our first-generation planar geometry Ge-on-Si single-photon avalanche diodes utilised a 1000 nm Germanium absorption region and showed extremely low noise-equivalent-power of 7.7 × 10−17 WHz−½ at a wavelength of 1310 nm. We demonstrate new structures designed to achieve high single-photon detection efficiency at a wavelength of 1550 nm.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.