Paper
5 June 2024 Design and finite element analysis of LNG cylinders
Xu Yang, Honghai Xu, Xueao Liu
Author Affiliations +
Proceedings Volume 13163, Fourth International Conference on Mechanical, Electronics, and Electrical and Automation Control (METMS 2024); 1316308 (2024) https://doi.org/10.1117/12.3030195
Event: International Conference on Mechanical, Electronics, and Electrical and Automation Control (METMS 2024), 2024, Xi'an, China
Abstract
The most critical component of an LNG vehicle is the gas cylinder. And cylinder is a low-temperature and adiabatic pressure vessel. When heavy-duty trucks are driving on the road, the gas cylinders are subjected to various shock loads and vibrations from the road, and can cause fatigue damage due to the influence of cyclic stress during long-term driving. In order to solve these problems, this project conducts static strength analysis and modal analysis of gas cylinders based on finite element theory. In this project, Soildwork software is used to establish a solid model of the gas cylinder framework. Hypermesh processing mesh and pre-processing; Abaqus solves static strength analysis and modal analysis. The results show that the stresses are mainly concentrated in the weld and component joints. The first-order modes are all above 25Hz, but they are very close. The recommendation given for the above situation is to strengthen the head thickness and weld width.
(2024) Published by SPIE. Downloading of the abstract is permitted for personal use only.
Xu Yang, Honghai Xu, and Xueao Liu "Design and finite element analysis of LNG cylinders", Proc. SPIE 13163, Fourth International Conference on Mechanical, Electronics, and Electrical and Automation Control (METMS 2024), 1316308 (5 June 2024); https://doi.org/10.1117/12.3030195
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Bending stress

Design

Finite element methods

Head

Material fatigue

Safety

Modal analysis

Back to Top