Paper
1 April 2011 Concept and feasibility of aerial imaging measurements on EUV masks
Author Affiliations +
Proceedings Volume 7985, 27th European Mask and Lithography Conference; 79850U (2011) https://doi.org/10.1117/12.895208
Event: 27th European Mask and Lithography Conference, 2011, Dresden, Germany
Abstract
On the road to and beyond the 22nm half-pitch on chip patterning technology, 13.5nm EUVL is widely considered the best next technology generation following deep ultraviolet lithography. The availability of an actinic measurement system for the printability analysis of mask defects to ensure defect-free mask manufacturing and cost-effective high-volume EUV production is an infrastructural prerequisite for the EUVL roadmap and represents a significant step toward readiness for commercialization of EUV for high-volume-manufacturing . Carl Zeiss and SEMATECH's EUVL Mask Infrastructure (EMI) program started a concept study and feasibility plan for a tool that emulates the aerial image formed by a EUV lithography scanner supporting the 22 nm half-pitch node requirements with extendibility to the 16nm half-pitch node. The study is targeting a feasible concept for the AIMSTM EUV platform, bridging a significant gap for EUV mask metrology.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Sascha Perlitz, Wolfgang Harnisch, Ulrich Strößner, Heiko Feldmann, Dirk Hellweg, and Michael Ringel "Concept and feasibility of aerial imaging measurements on EUV masks", Proc. SPIE 7985, 27th European Mask and Lithography Conference, 79850U (1 April 2011); https://doi.org/10.1117/12.895208
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications and 1 patent.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Extreme ultraviolet

Photomasks

Scanners

Extreme ultraviolet lithography

Reticles

Particles

Lithography

RELATED CONTENT

Towards reduced impact of EUV mask defectivity on wafer
Proceedings of SPIE (July 28 2014)
Status of the AIMS EUV development project
Proceedings of SPIE (October 01 2013)
NXE pellicle: development update
Proceedings of SPIE (September 26 2016)
Insertion of EUVL into high-volume manufacturing
Proceedings of SPIE (August 20 2001)

Back to Top