13 October 2023 Mask absorber, mask tone, and wafer process impact on resist line-edge-roughness
Author Affiliations +
Abstract

A high-numerical-aperture (NA) extreme ultraviolet lithography (EUVL) system has been highly desired and is now under construction at imec-ASML High NA Laboratory in Veldhoven. However, there are still many challenges to realizing high-volume manufacturing by High NA EUVL. Line edge roughness (LER) mitigation is one of the key elements. In our previous research, we studied how the normalized image log slope (NILS) and resist film thickness affect resist LER by exposure at NA 0.33 on NXE:3400 and S-Litho EUV. However, the mask absorber, mask tone, exposure dose, and postexposure bake (PEB) temperature were not the subject of previous investigations for decreasing LER. They have the potential to mitigate resist roughness such as illumination and resist thickness studied previously. Unbiased LER values of metal oxide resists (MOR) were experimentally measured on a half-pitch (hp) 14 nm line and space under several mask absorber/tonality, dose, and PEB temperature values. Per the mask absorber/tone, the NILS was varied using different illumination shapes. Low-n masks exhibited a higher NILS for the same illumination shape, which resulted in lower resist LER on the wafer. It was also found that the mask tone can contribute to LER mitigation. According to detailed investigations about the mask roughness, mask error enhancement factor, and flare by critical dimension scanning electron microscope (CD-SEM) measurements and S-Litho EUV, the most likely reason for the LER difference is a flare increase given by mask tone changes. From the dose and PEB temperature variation study, dose was apparently more dominant in resisting roughness than PEB temperature.

© 2023 Society of Photo-Optical Instrumentation Engineers (SPIE)
Eisuke Ohtomi, Vicky Philipsen, Ulrich Welling, Lawrence S. Melvin III, Yosuke Takahata, Yusuke Tanaka, and Danilo De Simone "Mask absorber, mask tone, and wafer process impact on resist line-edge-roughness," Journal of Micro/Nanopatterning, Materials, and Metrology 22(4), 044801 (13 October 2023). https://doi.org/10.1117/1.JMM.22.4.044801
Received: 14 July 2023; Accepted: 27 September 2023; Published: 13 October 2023
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Line edge roughness

Extreme ultraviolet lithography

Nanoimprint lithography

Semiconducting wafers

Light sources and illumination

Photoresist processing

Extreme ultraviolet

RELATED CONTENT

EUV contact holes and pillars patterning
Proceedings of SPIE (March 16 2015)
Roughness and variability in EUV lithography Who is to...
Proceedings of SPIE (April 01 2013)
Extension of practical k1 limit in EUV lithography
Proceedings of SPIE (March 18 2016)
Resist line edge roughness mitigation at high-NA EUVL
Proceedings of SPIE (May 25 2022)
A study of high NA EUV pattern stitching using rigorous...
Proceedings of SPIE (November 21 2023)

Back to Top