High aspect ratio (HAR) structures found in three-dimensional nand memory structures have unique process control challenges. The etch used to fabricate channel holes several microns deep with aspect ratios beyond 50:1 is a particularly challenging process that requires exquisitely accurate and precise control. It is critical to carefully analyze multiple aspects of the etch process, such as hole profile, tilt, uniformity, and quality during development and production. X-ray critical dimension (XCD) metrology, which is also known as critical dimension small-angle x-ray scattering, is a powerful technique that can provide valuable insights on the arrangement, shape, and size of periodic arrays of HAR features. XCD is capable of fast, non-destructive measurements in the cell-area of production wafers, making XCD ideal for in-line metrology. Through several case studies, we will show that XCD can be used to accurately and precisely determine key properties of holes etched into hard mask, multilayer oxide/nitride film stacks and slit trenches. We show that the measurement of hole and slit tilt can be achieved without the aid of a structural model using a Fast Tilt methodology that provides sub-nanometer precision. Measurements were performed across several production wafers to determine the etch uniformity and quality. Particular attention was given at the edge of the wafers to account for large variations observed. In addition, we used a detailed physical model to characterize the HAR structures beyond linear tilt. This approach provides a more complete picture of the etch quality.
High aspect ratio (HAR) structures found in 3D NAND memory structures have unique process control challenges. The etch used to fabricate channel holes several microns deep with aspect ratios beyond 50:1 is a particularly challenging process that requires exquisitely accurate and precise control. It is critical to carefully analyze multiple aspects of the etch process, such as hole profile, tilt, uniformity, and quality both during development and production. X-ray critical dimension (XCD) metrology, which is also known as critical dimension small-angle X-ray scattering (CD-SAXS), is a powerful technique that can provide valuable insights on the arrangement, shape, and size of periodic arrays of HAR features. XCD is capable of fast, non-destructive measurements in the cell-area of production wafers, making XCD ideal for in-line metrology. Through several case studies, we will show that XCD can be used to accurately and precisely determine key properties of holes etched into hard mask and multilayer oxide / nitride (ON) film stacks. We show that the measurement of hole tilt can be achieved without the aid of a structural model using a fast tilt methodology that provides sub-nanometer precision. Measurements were performed across several production wafers to determine the etch uniformity and quality. Particular attention was given at the edge of the wafers to account for large variation observed.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.