Edge illumination (EI) is an x-ray phase-contrast imaging technique, exploiting sensitivity to x-ray refraction to visualize features, which are often not detected by conventional absorption-based radiography. The method does not require a high degree of spatial coherence and is achromatic and, therefore, can be implemented with both synchrotron radiation and commercial x-ray tubes. Using different retrieval algorithms, information about an object’s attenuation, refraction, and scattering properties can be obtained. In recent years, a theoretical framework has been developed that enables EI computed tomography (CT) and, hence, three-dimensional imaging. This review provides a summary of these advances, covering the development of different image acquisition schemes, retrieval approaches, and applications. These developments constitute an integral part in the transformation of EI CT into a widely spread imaging tool for use in a range of fields.
The implementation of X-Ray Phase Contrast (XPC) imaging at synchrotrons has demonstrated transformative potential on a wide range of applications, from medicine and biology to materials science. However, translation to conventional laboratory sources has proven more problematic, because of XPC’s stringent requirements in terms of spatial coherence. This has imposed the use of either micro-focal sources, or collimators (e.g. source gratings) where sources with extended focal spots were used. This reduces the available x-ray flux leading to long exposure times, which is often exacerbated by the use of additional optical elements that need to be scanned during image acquisition. Where these elements are placed downstream of the object, they also lead to an increase in the delivered dose.
XPC has also been successfully adapted to full 3D, computed tomography (CT) implementations, which has however exacerbated the above concerns in terms of acquisition times and delivered doses.
We tackled this problem by developing an incoherent approach to XPC that works with non micro-focal laboratory sources without requiring any additional collimation. The method uses one or two low aspect ratio x-ray masks that are built on low-absorbing graphite substrates for maximum transmission through the mask apertures. The combination of this with a “single-shot” phase retrieval algorithm has enabled the development of a lab-based XPC-CT system that can perform a full scan in a few minutes while delivering low radiation doses. The talk will briefly describe how the method works, then show application examples including direct comparisons with the synchrotron gold standard.
In this article we discuss three different developments in Edge Illumination (EI) X-ray phase contrast imaging
(XPCi), all ultimately aimed at optimising EI computed tomography (CT) for use in different environments, and
for different applications. For the purpose of reducing scan times, two approaches are presented; the reverse
projection" acquisition scheme which allows a continuous rotation of the sample, and the single image" retrieval
algorithm, which requires only one frame for retrieval of the projected phase map. These are expected to lead
to a substantial reduction of EI CT scan times, a prospect which is likely to promote the translation of EI into
several applications, including clinical. The last development presented is the "modified local" phase retrieval.
This retrieval algorithm is specifically designed to accurately retrieve sample properties (absorption, refraction,
scattering) in cases where high-resolution scans are required in non-ideal environments. Experimental results,
using both synchrotron radiation and laboratory sources, are shown for the various approaches.
The application of x-ray phase contrast computed tomography (PCT) to the field of tissue engineering is dis- cussed. Specific focus is on the edge illumination PCT method, which can be adapted to weakly coherent x-ray sources, permitting PCT imaging in standard (non-synchrotron) laboratory environments. The method was applied to a prominent research topic in tissue engineering, namely the development of effective and reliable decellularization protocols to derive scaffolds from native tissue. Results show that edge illumination PCT provides sufficient image quality to evaluate the microstructural integrity of scaffolds and, thus, to assess the performance of the used decellularization technique. In order to highlight that edge illumination PCT can ultimately comply with demands on a high specimen throughput and low doses of radiation, recently developed strategies for scan time and dose reduction are discussed.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.