ASELSAN has been developing new generation high operating temperature (HOT) infrared detectors to reduce the power consumption of T2SL detectors. In this paper, recent results for HOT T2SL detectors for mid-wavelength infrared (MWIR) technology at ASELSAN are presented. Performance is shown for 640x512 format 15 µm pitch IDDCA with average noise equivalent temperature (NETD) and pixel operability values of <25 mK (F/4) and >99.5% at 110 K, respectively. These NETD and operability values remain unaffected by temperature between 77 K and 110 K.
ASELSAN, the largest defense company in Turkey, develops high performance electro-optical systems for various applications. Due to the technical challenges and relatively higher cost associated with MCT technology, there is a search for an alternative material system all over the world, especially for the applications that need relatively low quantum efficiency and high volume production. Research and development activities have been carried out on developing InAs/GaSb T2SL detectors for mid-wavelength infrared (MWIR) technology in ASELSAN. In this paper, recent results for 15μm pitch MWIR T2SL and 10μm pitch MWIR T2SL detectors are presented. InAs/GaSb T2SL epilayers are used for FPA fabrication with mesa pixel structures. Typically, over 99% operability and less than 25 mK NETD values are achieved for 15 μm pitch 640x512 format MWIR T2SL FPAs at IDDCA level (F/4). Besides ongoing efforts on development of FPAs with 15 μm pixel pitch, development activities for pixel pitch reduction are also initiated recently for MWIR T2SL FPAs for improving resolution and promising results are achieved. For this purpose, MWIR T2SL FPAs with 1280x1024/10μm resolution/pixel pitch are fabricated and NETD values less than 25 mK (F/2) with pixel operability of 97% are achieved for the first prototypes.
ASELSAN A.S., the largest defense company in Turkey, develops high performance electro-optical systems for land, air and naval applications. Research activities on developing Mercury Cadmium Telluride (MCT) detectors are on-going for MW and LW infrared bands. In this paper, recent results on Cadmium Zinc Telluride substrate growth, long wavelength (LW) Mercury Cadmium Telluride (MCT) detector fabrication and readout integrated circuit design are summarized. LW MCT focal plane arrays with a format of 320×256/30 μm are fabricated. Noise Equivalent Temperature Difference (NETD) of these focal plane arrays (FPA) are 45.7 mK and 59.9 mK (f/1.5, 77K) while the operabilites are 98.14% and 99.28%, respectively.
Many microelectronic devices require bonding dissimilar materials to operate under extreme operating conditions. Furthermore, certain applications, such as cooled infrared (IR) detection, require large temperature cycles between ambient and cryogenic temperatures under ultra-high vacuum (UHV) conditions. The complex expansion and contraction of the various materials within the detector package structure during temperature cycles introduces significant internal stresses that may ultimately result in the failure of the sensor and/or the package. Added to this complexity is the process sensitivity of the fabricated device to elevated temperatures and adhesive application. With orders-ofmagnitude difference between gap sizes, adhesive properties such as viscosity, cure kinetics, and process temperatures become paramount for successful sensor integration. In addition, stringent outgassing requirements associated with ultra-high vacuum application further complicates the selection process for cryogenic adhesives. Under these constraints, a myriad of commercial epoxy adhesives were evaluated. We devised a characterization methodology using a combination of various analytical techniques which elucidated the complex flow properties, and cure kinetics while highlighting critical characteristics necessary for a successful material for this application with a focus on rapid cycles of learning. As the application space matures, we see the need for a next generation of adhesives for demanding and ubiquitous infrared sensing applications.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.