A way to implement the pull system in a disassembly line is to use a multi-kanban model. The model employs several
types of kanbans attached to both components and subassemblies. The heart of the system lies in the kanban routing
mechanism which allows routing of kanbans in multi-directions based on real time conditions. This mechanism creates
minimum amount of residual inventory while satisfying varying demand levels. It also helps regulate the requests for
subassembly from upstream workstations when a breakdown occurs at a workstation. This reduces blockage and
starvation of subassemblies at workstations other than the broken workstation. In this paper, we discuss the difficulties
involved in utilizing the multi-kanban mechanism. We thoroughly investigate several scenarios of the disassembly line
setting including a scenario with common products, a scenario with component discriminating demand, a scenario in the
presence of products with multiple precedence relationships, and a scenario with workstation breakdowns. These
scenarios represent various disassembly environments that a facility may face when dealing with the disassembly of both
single and multiple products on a single line. In each scenario, we examine effectiveness of the multi-kanban model
using three performance measures, viz., the inventory level, the level of satisfied demand, and the customer waiting time.
We compare these results with the ones generated from the same line that employs a traditional push system. Using
simulation, we demonstrate that the overall performance of the disassembly line using multi-kanban mechanism
outperforms the disassembly line with the traditional push system.
The use of household appliances continues to rise every year. A significant number of End-Of-Life (EOL) appliances are generated because of the introduction of newer models that are more attractive, efficient and affordable. Others are, of course, generated when they become non-functional. Many regulations encourage recycling of EOL appliances to reduce the amount of waste sent to landfills. In addition, EOL appliances offer the appliance manufacturing and remanufacturing industries a source of less expensive raw materials and components. For this reason product recovery has become a subject of interest during the past decade. In this paper, we study the disassembly line for appliance disassembly. We discuss and incorporate some of the complications that are inherent in disassembly line including product arrival, demand arrival, inventory fluctuation and production control mechanisms. We show how to overcome such complications by implementing a multi-kanban system in the appliance disassembly line setting. The multi-kanban system (MKS) relies on dynamic routing of kanbans according to the state of the system. We investigate the multi-kanban mechanism using simulation and explore the effect of product mix on performance of the traditional push system (TPS) and MKS in terms of controlling the system's inventory while attempting to achieve a decent customer service level.
Product and material recovery relies on the disassembly process to separate target components or materials from the end-of-life (EOL) products. Disassembly line is especially effective when products in large quantity are disassembled. Unlike an assembly line, a disassembly line is more complex and is subjected to numerous uncertainties including stochastic and multi-level arrivals of component demands, stochastic arrival times for EOL products, and process interruption due to equipment failure. These factors seriously impair the control mechanism in the disassembly line. A common production control mechanism is the traditional push system (TPS). TPS responds to the aforementioned complications by carrying substantial amounts of inventories. An alternative control mechanism is a newly developed multi-kanban pull system (MKS) that relies on dynamic routing of kanbans, which tends to minimize the system's inventories while maintaining demand serviceability. In this paper we explore the impact of sudden breakdown of server on the performance of a disassembly line. We compare the overall performances of the TPS and MKS by considering two scenarios. We present the solution procedure and results for these cases.
The use of personal computers (PCs) continues to increase every year. According to a 1999 figure, 50 percent of all US households owned PCs, a figure that continues to rise every year. With continuous development of sophisticated software, PCs are becoming increasingly powerful. In addition, the price of a PC continues to steadily decline. Furthermore, the typical life of a PC in the workplace is approximately two to three years while in the home it is three to five years. As these PCs become obsolete, they are replaced and the old PCs are disposed of. It is estimated that between 14 and 20 million PCs are retired annually in the US. While 20 to 30% of the units may be resold, the others are discarded. These discards represent a significant potential source of lead for the waste stream. In some communities, waste cathode ray tubes (CRTs) represent the second largest source of lead in the waste stream after vehicular lead acid batteries. PCs are, therefore, not suitable for dumping in landfills. Besides, several components of a PC can be reused and then there are other valuable materials that can also be harvested. And with the advent of product stewardship, product recovery is the best solution for manufacturers. Disassembly line is perhaps the most suitable set up for disassembling PCs. However, planning and scheduling of disassembly on a disassembly line is complicated. In this paper, we discuss some of the complications including product arrival, demand arrival, inventory fluctuation and production control mechanisms. We then show how to overcome them by implementing a multi-kanban mechanism in the PC disassembly line setting. The multi-kanban mechanism relies on dynamic routing of kanbans according to the state of the system. We investigate the multi-kanban mechanism using simulation and demonstrate that this mechanism is superior to the traditional push system in terms of controlling the system’s inventory while maintaining a decent customer service level.
In recent years, the continuous growth in consumer waste and dwindling natural resources has seriously threatened the environment. Realizing this, several countries have passed regulations that force manufacturers not only to manufacture environmentally conscious products, but also to take back their used products from consumers so that the components and materials recovered from the products may be reused and/or recycled. Disassembly plays an important role in product recovery. A disassembly line is perhaps the most suitable setting for disassembly of products in large quantities. Because a disassembly line has a tendency to generate excessive inventory, employing a kanban system can reduce the inventory level and let the system run more efficiently. A disassembly line is quite different from an assembly line. For example, not only can the demand arrive at the last station, it can also arrive at any of the other stations in the system. The demand for a component on the disassembly line could fluctuate widely. In fact, there are many other complicating matters that need to be considered to implement the concept of kanbans in such an environment. In this paper, we discuss the complications that are unique to a disassembly line. We discuss the complications in utilizing the conventional production control mechanisms in a disassembly line setting. We then show how to overcome them by implementing kanbans in a disassembly line setting with demand fluctuation and introduce the concept of multi-kanban mechanism. We demonstrate its effectiveness using a simulation model. An example is presented to illustrate the concept.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.