1 July 1999 Design of an optical probe for surface profile measurement
Author Affiliations +
We propose a novel optical probe for surface profile measurement of optical surfaces. This probe uses a laser beam to measure local slopes of a surface and obtains the surface profile through numerical integration of the measured slopes. Slope measurement is based on a new angle measurement method, namely, angle measurement based on the internal-reflection effect (AMIRE). The probe is a high-resolution (0.1-arcsec), compact (80x60x40 mm) device with a simple measurement principle. For surface profile measurement, the probe is installed on a coordinate measuring machine (CMM), which provides the necessary scanning motion. A commercial laser interferometer is used to measure the rotational error of the CMM in real time. The result is subtracted from the slope data collected by the probe for error compensation. Measurement results of a spherical mirror are presented that show a nanometer-order resolution in surface profile measurement.
Peisen S. Huang and Xiaorong R. Xu "Design of an optical probe for surface profile measurement," Optical Engineering 38(7), (1 July 1999). https://doi.org/10.1117/1.602279
Published: 1 July 1999
Lens.org Logo
CITATIONS
Cited by 11 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Prisms

Reflectivity

Calibration

Optical design

Profiling

Reflection

Back to Top