Fabrication of CMUTs using sacrificial release process with ashing assisted polysilicon release

U Kin Che; Xin Liu; Yuanyu Yu; Jiujiang Wang; Sio Hang Pun; Fei Chen; Peng Un Mak; Mang I Vai

doi:10.1117/12.2660554

6 December 2022 Fabrication of CMUTs using sacrificial release process with ashing assisted polysilicon release

U Kin Che, Xin Liu, Yuanyu Yu, Jiujiang Wang, Sio Hang Pun, Fei Chen, Peng Un Mak, Mang I Vai

Proceedings Volume 12458, International Conference on Biomedical and Intelligent Systems (IC-BIS 2022); 1245807 (2022) https://doi.org/10.1117/12.2660554
Event: International Conference on Biomedical and Intelligent Systems, 2022, Chengdu, China

Abstract

Capacitive Micromachined Ultrasonic Transducer (CMUT) is a type of ultrasonic transducer that can be applied in many fields like chemical and mechanical sensing, physical imaging, and bio-imaging. Sacrificial layer release is one of the fabrication methods and cavity releasing is the key part of this method. The stress of the sacrificial material is one of the causes making membranes break in this procedure. The previous studies had a phospho-silicide-glass (PSG) layer deposited between polysilicon sacrificial layer and silicon nitride membrane with LPCVD partially solved the problem. However, its processing temperature is relatively high, which makes it not compatible with CMOS integrated circuits (ICs). This work fabricated CMUTs in the sacrificial layer release process, with polysilicon as the main sacrificial layer. Utilizing chemical reaction of polysilicon in ashing process, a thin oxide was formed between the sacrificial layer and membrane while removing the remaining photoresist with ashing. The result showed that it could also help produce large membranes with a lower processing temperature, which can be more compatible with CMOS ICs. After fabrication, the impedance of an element with 100 μm diameter cells was measured to be several hundred ohms in air with 30 V bias voltage and the resonance frequency was 4.7 MHz.

Citation Download Citation

U Kin Che, Xin Liu, Yuanyu Yu, Jiujiang Wang, Sio Hang Pun, Fei Chen, Peng Un Mak, and Mang I Vai "Fabrication of CMUTs using sacrificial release process with ashing assisted polysilicon release", Proc. SPIE 12458, International Conference on Biomedical and Intelligent Systems (IC-BIS 2022), 1245807 (6 December 2022); https://doi.org/10.1117/12.2660554

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available